EYE BOLT / EYE SCREW (DIN580)

EYE BOLT / EYE SCREW (DIN580)
Eye bolt is a bolt with a loop at one end. They are used to firmly attach a securing eye to a structure, so that ropes or cables may then be tied to it.

Machinery eye bolts are fully threaded and may have a collar, making them suitable for use with angular loads up to 45°. Eye bolts without a shoulder should not be used for angular loads. Heavy forged eye bolts with a continuous eye may be forged with an integral shoulder, allowing their use for heavy off-axis loads.

Eye bolt with integral wall anchorEye bolts are often installed into masonry and so versions that form their own anchor bolt are commonly available. Most of these screw into some form of shield anchor. Some lightweight forms are not screwed, but rely on just the pull on the ring itself to expand the anchor.

A ring bolt is an eye bolt with a captive ring passing through it. The loose ring is articulated, such that it can rotate in at least one axis, and can thus reduce bending forces on the bolt when loaded and will present the minimum obstruction when "flat".

INTERNATIONAL STANDARDS

  • DIN444

  • DIN580

  • DIN582

  • DIN10 – DIN40

  • DIN 7332

APPLICATION

It is used for fastening locks and is widely used in automobiles, construction, machinery, home appliances, and electronics industries.

     Uses: It is often used for load-bearing operations, or the use of bolts, nuts, gaskets for various materials, and various special screws, screws, hexagon bolts, white iron screws, white iron... The eye bolts are bolts with rings at one end. They are used to securely fix the fixed eye to the structure so that the rope or cable can be attached to it.

MATERIAL

  • STEEL C1006-C1045
  • STAINLESS STEEL SUS304, SUS316

SIZE RANGE

SIZE RANGE:
  • SPECIFICATION  = 1/4" - 1"
  • d = 6 mm - 25 mm

SURFACE TREATMENT

SURFACE TREATMENT TYPES:

  • PLAIN ; NON-PLATED
  • HEAT TREATMENT
  • ZINC PLATED – WHITE ZINC / YELLOW ZINC / BLACK ZINC
  • Zinc trivalent coatings Cr3+ (Meet RoHS standards)
  • Zinc hexavalent zinc plating Cr6+
  • Nickel plating
  • Black Oxide
  • Hot Dip Galvanised
  • GEOMET® 500
  • DACROMET®
  • Passivation
  • All electro-plating, electro-coating and surface treatment specifications can meet customer's requirements.