THREADED ROD / STUD (DIN975 / DIN976)

THREADED ROD / STUD (DIN975 / DIN976)
FULL THREAD ROD
hanger bolt
hanger bolts
A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends.

The thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread.

Studs may have a drive slot in one end to facilitate installing the stud.

INTERNATIONAL STANDARDS

  • DIN975
  • DIN976
  • ANSI/ASME b18.31.3
  • DIN 88149 HANGER BOLTS

  • BN 15018

APPLICATIONS

  • The threaded rod is used in all types of industries such as, electrical, agricultural and construction.
  • It is more popular as it eliminates the need for raw material. You will also not require threading equipment or any type of dies. These rods are produced with threads and is rolled under high pressure. This gives them greater strength therefore can be used along with standard nuts and washers.
  • The benefit with the rods is that they can be cut with the help of metal cutting hack saw or may be power band saw. This makes the nuts move easily over the threads.
  • The threaded rods are ideal for plant maintenance and industries more where corrosive conditions exist. It also requires high humidity which is found in agricultural and electrical components. It is seen to be quite popular in plumbing and contractor fields. It is more needed in places where cleanliness and attractiveness is necessary.It is greatly resistant to corrosion so is widely used in medical, maintenance and machinery.

MATERIAL

  • STEEL C1006-C1045
  • STAINLESS STEEL SUS304, SUS316
  • GRADE 8.8: C1018 - C1022, 10B21
  • MILD STEEL / MID CARBON STEEL: C1035 - C1045
  • ALLOY STEEL: SCM435 - SCM440 (Grade 10.9, Grade 12.9)
  •  │8│GRADE 1008K 1010 
  • 7 8 GRADE 1015(M<16) CH38F (M≥16)
  • 8 10 GRADE CH38F 1039 10B21 10B33
  • 9 12 GRADE 1039 10B21 10B33 10B38 
  • Material according to customer’s specifications

SIZE RANGE

SIZE RANGE:
  • D = M6 ~ M48
  • L = 1 METRE ~ 3 METRES
  • d = 1/4" ~ 2"

SURFACE TREATMENT

SURFACE TREATMENT TYPES:

  • PLAIN ; NON-PLATED
  • HEAT TREATMENT
  • ZINC PLATED – WHITE ZINC / YELLOW ZINC / BLACK ZINC
  • Zinc trivalent coatings Cr3+ (Meet RoHS standards)
  • Zinc hexavalent zinc plating Cr6+
  • Nickel plating
  • Black Oxide
  • Hot Dip Galvanised
  • GEOMET® 500
  • DACROMET®
  • Passivation
  • All electro-plating, electro-coating and surface treatment specifications can meet customer's requirements.