T-NUT / TEE NUT / BLIND NUT (DIN1624)

T-NUT / TEE NUT / BLIND NUT (DIN1624)
A T-nut, T nut, or tee nut (also known as a blind nut, which can however also refer to a rivet nut or an insert nut, and likewise drive-in nut) is a type of nut used to fasten a wood, particle or composite materials workpiece, leaving a flush surface.

T-NUT has a long, thin body and a flange at one end, resembling a T in profile.

The flanges of T-nuts often have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention.

Unlike the standard round base T-nuts, the eight-sided T-nuts can be fed efficiently and reliably via machine. The eight-sided T-nut base has become the standard configuration for T-nuts inserted by machine.

INTERNATIONAL STANDARDS

  • DIN1624
  • DIN 508
  • JIS B1196

APPLICATIONS

  • T-Nuts are commonly used to fasten a wood, particle or composite materials workpiece, leaving a flush surface.

  • T-slot nuts, which are used in work-holding in machine tools. T-slot nuts fit in T-section slots in the machine work-table and are used in conjunction with studs and clamps to provide flexible means of holding workpieces in place.

MATERIAL

  • LOW CARBON STEEL : C1006 - C1045
  • ACCORDING TO CUSTOMER'S REQUIREMENT

SIZE RANGE

  • M6, M8, M10
  • 1/4" , 5/16", 3/8"

SURFACE TREATMENT

SURFACE TREATMENT TYPES:

  • HEAT TREATMENT
  • ZINC PLATED – WHITE ZINC / YELLOW ZINC / BLACK ZINC
  • Zinc trivalent coatings Cr3+ (Meet RoHS standards)
  • Zinc hexavalent zinc plating Cr6+
  • Nickel plating
  • Black Oxide
  • Hot Dip Galvanised
  • GEOMET® 500
  • DACROMET®
  • Passivation
  • All electro-plating, electro-coating and surface treatment specifications can meet customer's requirements.